eclipse - Ubuntu is not detecting my android device -

-

I'm new to Android. I've just downloaded and installed Android SDK. Now when I run an app from Apple, my The device is not detected. I was googled and brought in with this as my solution, but she did not even work.

Here is the 51-android.rules 

  SUBSYSTEMS == "usb", ATTR {idProduct} == "0BB4", ATTR {idProduct} == " 0c03 ", MODE =" 0666 ", GROUP =" plugindev ", OWNER =" & lt; username "; After that I rebooted my laptop, and it ran the command:  
  laptop name: username / ~ / Android / adt-bundle / Sdk / platform-tools $ Adb device  
 
 I get this output: 
 
  * daemon is not running Now start at 5037 port * Started * List of attached equipment No permission  
 
  edit  
 
 If I run  lsusb , then when the device is plugged in I get the following output just 002 Device 004: ID 0bb4: 0c03 HTC (High Tech Computer Corp) Bus 002 Device 002: ID 8087: 0024 Intel Corp Integrated Rate Match Hub Just 002 Device 001: ID1d6b: 0002 Linux Foundation 2.0 Route Hub Bus 001 Device 003: ID 04f2: B-337 Chinchin Electronics Co., Ltd. Bus 001 Device 002: ID 8087: 0024 Intel Crop Integrated Rate Match Hub Just 001 Device 001: ID1d6b: 0002 Linux Foundation 2.0 Route Hub

I am using Micromax Canvas 2.2 A 114 - Android version 4.2.2

Please help me please thank you.

Please follow step open command prompt

1) Command

Pre> subsystem == "USB", ATTRS {idVendor} == "0bb4", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "0e79", mode = "0666" subsystem == "usb", ATTRS {idVendor} == "0502", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "0b05", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "413c", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "0489", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "091e", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "18d1", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "0bb4", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "12d1", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "24e3", mode = "0666" subsystem == "USB", ATTRS {idVendor} == "2116", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "0482", MODE = "0666" SUBS YSTEM == "usb", ATTRS {idVendor} == "17ef", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "1004", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "22b8", mode = "0666" subsystem = = "USB", ATTRS {idVendor} == "0409", mode = "0666" subsystem == "USB", ATTRS {} = idVendor = "2080", MODE = "0666" SUBSYSTEM == "usb", ATTRS {IdVendor} == "0955", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "2257", MODE = "0666" subsystem == "USB", ATTRS {idVendor} == " 10a9 ", Od = "0666" subsystem == "USB", ATTRS {idVendor} == "1d4d", mode = "0666" subsystem = "Usb", ATTRS {idVendor} == "0471", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "04da", MODE = "0666" SUBSYSTEM == "usb", ATTRS {IdVendor} == "05c6", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "1f53", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "04e8", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "04.07", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "0fce", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "0930", MODE = "0666" SUBSYSTEM == "usb", ATTRS {idVendor} == "192", MODE = "0666"

3) Save and enjoy ...

This is a work for me, and if not, then inform me that I have received this answer related to the 70 rules structure. The post is posted.

Check for Thanx .. 51-android.rules

and


Comments

Post a Comment

Popular posts from this blog

Pass DB Connection parameters to a Kettle a.k.a PDI table Input step dynamically from Excel -

-
Image
I have a requirement whenever I run my own kettle, dynamically took database connection parameters from an excel source Every run should go. I have an Excel column names: hostname, username, database, password. I want to pass these connection parameters to my table input stage dynamically whenever it runs the job. This is what I was trying to do. You can get it Connection parameters from the DB reading source (for example Excel or a CSV file in my example) < / Li> Store the parameters in the variable Using the variable in your connection's settings. Setting Variables Create another conversion for (you can not do it in the same conversion Uses): set variables element variable: The element that reads / writes your data creates a new connection and sets the connection parameter using $ {variable name_} Note that you will need to type in the field field in the field $ {password} Also keep in mind that this can be a security problem as the
Read more

multithreading - PhantomJS-Node in a for Loop -

-
I am trying to implement a screen-scraps application that opens a URL in which a parameter changes as it is for a loop: var data = [ '100', '101', '102', '103', '104']; (Var indexA = 0; indexA & lt; data.length; indexA ++) for {Phantom Generation ({'port': freeport}, function (pH) {ph.create page (function (page) {page.open ("http: //...++ data [index B] +" ... " , Status {console.log ("open site:" + data [index B], position); / * OLD * / indexB ++; page evaluation (function () {// page scrape and an object Return}, function {console.log (result.dataRequest); // here is the problem}); / * new and fixed * / indexB ++} first console Logs it: Open Site: 100 Success Opens Site: 101 Success B Ola Site: 102 Success Opening Site: 103 Success Opened Site: 104 Success Which is good. Data is verified in scrap HTML and from index to array Matches. So in page 101 I scrap '101 and retrieve' and pu
Read more

c++ - MATLAB .m file to .mex file using Matlab Compiler -

-
I know that it can speak as a very famous topic, but something that helps me with it Not found This scenario is: I have my functions function, no matter what's inside, it's a generic function that may depend on other toolboxes. Does. Has input and output; I want to generate the same myFun.mex function; : Lib myFun This way I get some new files: libmyfun.c libmyfun.dll Libmyfun.exp libmyfun.exports libmyfun .h libmyfun.lib Reading around and I think that Creating a myfun.cpp that is very famous is included: / * gateway function * / zero max function (ent NLHS, MXARRA * PLS [], int NRHS, CONST M Xeray * PHS []) Here is the Variable Deals * / / * code here * /} I have tried to do this and are called Regular of Max Generation: Max ('- v', 'myfun.cpp') But I get many errors, and I should say that my myfun.cpp copy / Paste Function is where I have a lot of doubts ... especially on input / output management. My q
Read more